N'oveen CH9099, Руководство пользователя

Страница: 24 / 36

24
If the power settings were different, start-up reset will go to those set as default.
CONNECTING THE APPLIANCE TO WIFI
DOWNLOAD THE APP TO YOUR PHONE
Download the ”TUYA SMART” app, from your chosen app store, using the QR codes
below, or by searching for the app in your chosen store.
MODE FOR SETUP
The heater has one setup mode, AP (Access Point). The AP connection uses a direct local
WiFi connection between your phone and the heater to upload the network details.
When first turned on using the main switch on the right side of the unit, the WiFi will be
turned off. To turn on the WiFi, press and hold the Wi-Fi button for 3 seconds. The WiFi
indicator will flash quickly to indicate the unit is in AP connection mode.
Please ensure your device is in the correct WiFi connection mode for the connection type
you are attempting, the flashing WiFi indicator on your heater will indicate this.
Connection Type Frequency of Flashes
AP (Access Point) Flashes once per second
TURNING THE WIFI OFF
To turn the WiFi off, the appliance can be turned off using the main switch on the right side
or press and hold the Wi-Fi button for 5 seconds . When the unit is turned back on it will
start with the WiFi turned off, until reactivated following the steps
above.