5
ENGLISH
EN
IMPORTANT
Read these instructions fully before using the heater. Retain these instructions
for future reference.
ASSEMBLY OF THE HEATER
Before using the heater
，
the feet
（
supplied separately in the cartoon
，
must
be fitted to the unit. These are to be attached to the base of the heater using
the 4 self-tapping screws provided
，
taking care to ensure that they are
located correctly in the bottom ends of the
heater side moldings.
SAFETY INSTRUCTIONS (to be read before operating the heater)
1. Do not use the heater unless the feet are correctly attached.
2. Ensure the power supply to the socket into which the heater is plugged is in accordance
with the rating label on the heater and that the socket is earthed.
3. Keep the power cord away from the hot body of the heater.
4. Warning
：
Do not use this heater in the immediate surroundings of a bath
，
a shower or a
swimming pool.
5. Warning
：
In order to avoid overheating
，
do not cover the heater.
6. Indoor use only.
7. Do not place the heater on carpets having a very deep pile.
8. Always ensure that the heater is placed on a firm level surface.
9. Do not place the heater close to curtain or furniture in order to avoid a fire hazard.
10. Warning
：
heater is not located immediately below a socket-outlet.
11. Do not insert any object through the heat outlet or air grilles of the heater.
12. Do not use the heater in areas where flammable liquids are stored or where flammable
fumes may be present.
13. Always unplug the heater when moving it from one location to another.
14. Warning
：
If the supply cord is damaged
，
it must be replaced by the manufacturer
，
its
service agent or a similarly qualified person in order to avoid a hazard.
15. This appliance is not intended for use by persons
（
including children
）
with reduced
physical
，
sensory or mental capabilities
，
or lack of experience and knowledge
，
unless
they have been given supervision or instruction concerning use of the appliance or a person
