Novation Launchkey MK3, Руководство программиста

Страница: 9 / 21

9
Note that to provide some degree of script compatibility with the Launchkey Mini MK3, the Scene Up
and Scene Down buttons also report back CC 68h (104) and 69h (105) respectively on Channel 16.
The Control Change indices listed are also used for sending colour to the corresponding LEDs (if the
button has any), see the
Colouring the surface chapter further below.
Additional modes available in DAW mode
Once in DAW mode, the following additional modes become available:
- Session and Device Select mode on the Pads.
- Device, Volume, Pan, Send-A and Send-B on the Pots.
- Device, Volume, Send-A and Send-B on the Faders (LK 49 / 61 only).
When entering DAW mode, the surface is set up the following manner:
- Pads: Session.
- Pots: Pan.
- Faders: Volume (LK 49 / 61 only).
The DAW should initialize each of these areas accordingly.
Mode report and select
The modes of the Pads, Pots and Faders can be controlled by Midi events, and are also reported back
by the Launchkey MK3 whenever it changes mode due to user activity. These messages are important
to capture as the DAW should follow these setting up and using the surfaces as intended based on the
selected mode.
Pad modes
Pad mode changes are reported or can be changed by the following Midi event:
- Channel 16 (Midi status: BFh, 191), Control Change 03h (3)
The Pad modes are mapped to the following values:
- 00h (0): Custom Mode 0
- 01h (1): Drum layout
- 02h (2): Session layout
- 03h (3): Scale Chords
- 04h (4): User Chords
- 05h (5): Custom Mode 0
- 06h (6): Custom Mode 1
- 07h (7): Custom Mode 2
- 08h (8): Custom Mode 3
- 09h (9): Device Select
- 0Ah (10): Navigation