background image

25

Starting from Scratch

If you’re already familiar with producing music using hardware, you can probably skip this section! 
But if you’re a novice, you may find it useful.

Once you’ve experimented with the factory demo patterns for a while, you will probably want to 
create a pattern from scratch.

Select 

Projects

 and select an empty memory slot (a pad showing dim blue). Now press 

1

  

5

 to enter 

Track 1’s 

Sample View

. When you press 

 

Play

 you’ll see the white pad (the play cursor) progressing 

across the 16 Pattern steps:

PLAY

Pads 1-16: Pattern Steps

Pads 17-32: Samples

(One page of eight)

Default drum sample

You won’t hear anything just yet.

NOTE

: On Circuit Rhythm, Patterns are 16 steps long by default. This can be changed to 32 steps for 

any or all of the eight tracks. This topic is explained in “Step Page” on page 49.

For simplicity, the discussion in this section uses 16-step Patterns as examples.

To build a beat, first tap sample slots 1 or 2 (slot 1 is pad 17, slot 2 is pad 18) to select a kick drum 
sample, then tap* steps to add triggers to the pattern. To make a basic hip-hop drum beat, add kicks 
on the steps seen in the picture below (1, 3, 8, 9, 11 and 14). Now press play to hear back your beat.

*Many of Circuit Rhythm’s buttons produce different behaviours depending on whether the button is “tapped” (half a second or 
less) or “held”. In this case, a holding a step pad will arm the step for a sample flip: this feature is discussed on page 31.

Содержание Circuit Rhythm
































































































Отзывы: