manualshive.com logo in svg

Novation Bass Station Rack, Руководство пользователя

Поделиться
Скачать
Novation Bass Station Rack Скачать руководство пользователя страница 44

This parameter controls the way in which the Arpeggiator resets itself when new notes are
played. The range is:

“oF”
This means that the cycle of the sweep of the Arpeggiator is not interrupted when new keys are pressed on the controller
keyboard, the Arpeggiator will simply change the notes to the new ones.
“on”
This means that the cycle of the Arpeggiator is reset to the start of the pattern when a new set of notes are played on the
controller keyboard. This is particularly useful live and is generally more musically correct.
This parameter is memorised with the program.

Button 6 - Panning

Related groups of parameters are in “Pages” within each button. This buttons parameters are used to control the Stereo
Panner.

Pages exist within this button and they are selected by pressing button 6 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the “Data Entry / Portamento” Rotary con-
trol. Fine increments of parameters values can be set using the “-” and the “+” Buttons.

Data Entry/Program

Utilities/Panning

42

PANNING

6

Содержание Bass Station Rack



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды