Chapter 3 SMART7 Operation
SMART7 Installation and Operation User Manual v6
56
l
Format
Logs can be generated in Binary or ASCII format. For information about these formats, refer to Binary and
ASCIIin the
Agriculture Commands and Logs Reference Manual
.
l
Trigger
The trigger determines the schedule on which the log is collected. The trigger selected depends on the inform-
ation required and the type of log. For more information about triggers, refer to Log Types and the
LOG
com-
mandin the
Agriculture Commands and Logs Reference Manual
l
Destination
The destination determines where the log is sent. The log can be sent to any communication port on the
receiver or a file on the computer running NovAtel Connect.
If a communication port is selected, ensure that a device to receive the log is connected to that port.
The filename and directory used when collecting to a file is configured in the
Settings
dialog box. Refer to
3.12.3 Start Collecting Logs
To start collecting logs:
1. Ensure that the logs you want to collect are shown on the Logging Control Window.
2. Click the
Start Recording
button.
The button changes to Stop Recording.
If logs are being collected in a file on the computer, the file name used and a running total of the file size
appears.
3.12.4 Stop Collecting Logs
To stop collecting logs:
1. Click the
Stop Recording
button.
3.12.5 Change the Log File Settings
When logging to a file on the NovAtel Connect computer, the file used is determined by the log file settings. To
change the log file settings:
1. Click the
button in the Logging Control Window.
The
Settings
dialog box appears.
