manualshive.com logo in svg

Novatel SMART6, Руководство пользователя, Страница: 58 / 78

Поделиться
Скачать
Novatel SMART6 Скачать руководство пользователя страница 58

SMART6 User Manual Rev 3

58

Appendix B 

Commands

The SMART6 firmware implements the OEM6 family command set, documented in the 

OEM6 Family 

Firmware Reference Manual

. Commonly used SMART6 commands are summarized in 

Table 8, SMART6 

Commands

 and documented in this appendix.

 Table 8:  SMART6 Commands

The arguments for each of these commands are described in the following sections.

For a complete listing and description of the other commands that the SMART6, an OEM6 based receiver, is 
capable of processing, refer to the 

OEM6 Family Firmware Reference Manual

.

B.1 SYNTAX CONVENTIONS

The following rules apply when entering commands, at the command prompt, from a keyboard.

1.

Courier 

font is used to illustrate program output or user input.

2. References to other commands, logs or any of their fields are shown in 

italics

.

3. The commands are not case sensitive. For example, you could type either 

RESET 

or 

reset

.

4. Except where noted, either a space or a comma can separate commands and their required entries. For 

example, you could type either 

fix position 51.11358042 -114.04358013 1059.4105 

or

 fix 

position 51.11358042, -114.04358013, 1059.4105

.

5. At the end of a command, a carriage return is required. For example, press <Enter> or <Return> on your 

keyboard.

6. Responses are provided to indicate whether or not an entered command was accepted. The format of 

the response depends on the format of the command. Refer to the 

OEM6 Family Firmware Reference 

Manual

 for more information.

7. Optional parameters are indicated by square brackets ( 

[ ]

 ). For commands that contain optional 

parameters, the value used if the optional parameter is not specified is given in the syntax table for the 
command.

8. Data format definitions, as specified in the “Format” field, are detailed in the 

OEM6 Family Firmware 

Reference Manual

. Note that all binary data is little-endian byte-ordered.

ASCII Command Message ID

Description

BTCONTROL

8205

Enable or disable Bluetooth wireless technology.

FRESET

20

Factory reset (existing OEM6 commands extended to SMART6)

LOG

1

Request logs from the receiver 

$PMDT

8200

Configure the Tilt Compensation function (SMART6 command)

RADARCFG

8192

Configure the Emulated Radar signal output (SMART6 command)

SERIALCONFIG

1246

Configure the receiver serial port settings.

SETCANNAME

1091

Set the CAN name fields.

Содержание SMART6















































































Отзывы:

Нет отзывов