Novatel MiFi 7000, Руководство пользователя

Страница: 54 / 88

50
LAN
From LAN settings, you can manage your MiFi’s network. These settings include:
•
IPv4
•
IP address
— The IP address for the MiFi.
•
Subnet mask
— The subnet mask network setting for the MiFi. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
make sure you use the correct Subnet Mask for the IP address range containing the LAN
IP address.
•
MAC address
— The Media Access Controller (MAC) or physical address for the MiFi.
•
Turn On DHCP server
— The
Turn On DHCP Server
checkbox turns the DHCP Server
feature on or off. Normally this should be left turned on.
•
Start DHCP address range at
— The start range of IP addresses reserved for use by the
MiFi's DHCP server table.
•
DHCP address range
— The current range of IP addresses reserved for use by MiFi's DHCP
server table. If a device with a static IP address wants to connect to MiFi 7 000 Ls network,
the static IP should be outside of the DHCP address range. Most devices do not have a
static IP.
•
DHCP lease time
— Use to determine how often connected devices must renew the IP
address assigned to them by the DHCP server. Normally this is left at the default value,
but if you have special requirements you can change the value.
•
IPv6
•
Enable IPv6
— The
Enable IPv6
checkbox turns ON/OFF the IPv6 feature.
•
Link-Local address
— Displays the local address when IPv6 is turned on.
Remember to
Save Changes
if you change any settings.