Novatel GPS-703-GGG-N, Руководство пользователя

Страница: 6 / 8

6
Refer to the Mechanical Drawings on the previous panel and the close-up of the label below before reading
this section.
Table 1 shows typical absolute and relative offset numbers for the current GPS-703-GGG antenna model.
Table 1: Phase Center Offset (GPS-703-GGG with TNC)
For absolute and relative offset values for phase center variation (PCV tables are available for download),
visit the GEO++ website at
www.geopp.com .
If you need any further advice on this matter, visit our website at www.novatel.com . Other methods of
contacting Customer Service can be found on the last panel of this guide.
 Only integer hardware revisions affect the phase center offsets. For example, the numbers
given for hardware revision 2.02 are applicable to an antenna labelled H/W Rev: 2.00, 2.04,
2.12 and so on.
Absolute (GEO
++
) Height
L1
61.5 mm
L2
58.68 mm
H/W Rev: 1.00 P/N: 0101xxxx
MADE IN CANADA www.novatel.ca
NVH99999999
GPS-70x ANTENNA
Antenna model
Hardware Revision