OPERATION AND MAINTENANCE MANUAL FOR
ROTOSTRIP
– SURFACE PREPARATION TOOL
FOR PROFESSIONAL USE ONLY
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT.
IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION
AVAILABLE TO OTHERS THAT WILL OPERATE THIS PRODUCT.
FAILURE TO OBSERVE THE FOLLOWING WARNING COULD RESULT IN INJURY.
PLACING TOOL IN SERVICE
Always install, operate, inspect and maintain
this product in accordance with all applicable
standards and regulations (local, state, country,
federal, etc.).
Compressed air models always use clean, dry
air at 90 psi (6.2bar/620kPa) maximum air
pressure at the inlet. Higher pressure may
result in hazardous situations including
excessive speed, rupture, or incorrect output
torque or force.
Electric models must always utilize proper
gauge, and rated electrical cords with correct
connections.
Be sure all hoses and fittings are the correctly
sized and secured.
Ensure an accessible emergency shut off has
been installed in the air or electrical supply line.
Make others aware of its location.
Do not use damaged, frayed, or deteriorated air
hoses and fittings.
Always use proper gauge electrical cords with
correct connections. (When applicable.)
Electric models must not use damaged, frayed, or
deteriorated electrical cords and connections.
Keep clear of whipping air hoses. Shut off the
compressed air before approaching a whipping
hose.
Always turn off and disconnect the tool from its
power supply before installing, removing or
adjusting any accessory, or before performing
any maintenance on the tool.
Do not lubricate tools with flammable or volatile
liquids such as kerosene, diesel or jet fuel. Use
only recommended lubricants.
Keep work area clean, uncluttered, ventilated and
illuminated.
Keep all electrical connections clear of water or
other liquids. (When applicable.)
Do not operate the machine while flammable or
volatile liquids such as gasoline, diesel or jet fuel
are present. Failure to do so can result in
explosion. (When applicable.)
Do not remove any labels. Replace any damaged
label.
USING THE TOOL
Always wear protection when operating or
performing maintenance on this tool.
Always wear hearing protection when operating
this tool.
Always use Personal Protective Equipment
appropriate to the tool used and material
worked. This may include dust mask or other
breathing apparatus, safety glasses, ear plugs,
gloves, apron, safety shoes, hard hat and other
equipment,
Prevent exposure and breathing of harmful dust
and particles created by power tool use:
-
Some dust created by power sanding, sawing,
and grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
-
Lead from lead based paints,
-
Crystalline silica from bricks and cement and
other masonry products, and
-
Arsenic and chromium from chemically treated
lumber
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
Keep others a safe distance from your work area,
or ensure they use appropriate Personal
Protective Equipment.
This tool is not designed for working in explosive
environments, including those caused by fumes
and dust, or near flammable materials.
NOTICE
WARNING
Содержание Rotostrip ROTO100
Страница 1: ......
