NovaTec GFH-1500, Инструкция по эксплуатации

Страница: 44 / 46

44
Document: GFH-NT 1500-4000 IM 14 DEC 2016
Gas Fired Heater Instructions
©2016 NOVATEC, Inc. All Rights Reserved
Section 2 Check List
Pass Fail
With power off, verify all electrical connections are tight.
 
With no flame (WNF), check the combustion blower for
the proper rotation.
 
WNF, disconnect the flame rod wire and attempt to start
the burner. The flame should go out (FO), and the flame
controller (FC) should go into a lock out condition (LO).
 
WNF, disconnect the spark plug wire and attempt to start
the burner. The flame should not start, and the FC
should go into LO.
 
With flame on (WFO), check for gas leaks.
 
WFO, visually observe blue flame at low fire (LF).
 
WFO, visually observe blue flame at high fire (HF).
 
WFO, press test/reset button on flame controller (FCR).
You should observe FO and LO, which requires it to be
reset before allowing restart. The two main safety shut-
off valves should be closed as observed by the position
indicator (PI) or POC switch on each valve.
 
WFO, press test button on the APS; you should observe
FO, LO, and PI or POC switch.
 
WFO, turn the gas supply off; you should observe FO,
LO, and PI or POC switch.
 
Comments
_____________________________________________________________
______________________________________________________________________
_