Option 8: Tactical Momentary
(short-short-long flash)
The Tactical Momentary option provides a pure momentary mode
of operation. When the button is pressed, the light will be on. When
released, the light will be off. Any desired configuration changes
(such as forcing on to Maximum) must be made before enabling the
Tactical Momentary option.
If the Automatic Button Lock option is enabled, the button will lock
upon enabling the Tactical Momentary option and the light remains
dark when the button is pressed. Upon releasing the Automatic
Button Lock (triple-click), the light will remain off until the button is
pressed again.
When both the Tactical Momentary option and the Automatic Button
Lock option are enabled, a Soft-Reset will force the button to lock.
Tactical Momentary is disabled by performing a Factory-Reset.
Option 9: Ramping/Options Menu
(dim-to-bright)
The Ramping/Options Menu option is used to disable the Brightness
Ramping and Options menu, preventing further configuration
changes. Perform a factory reset to re-enable the Brightness
Ramping and Options menu.
The default setting is: Enabled.
Error Flash Sequence (six rapid flashes)
While in the Options menu, the Error Flash Sequence of six rapid
flashes will be displayed if the button is not pressed for 10 seconds,
an unknown command is entered, or the button is not held until
the light turns off. The light will exit the Options menu unchanged,
returning to the last brightness setting accessed.
5. Resets.
Resets are performed if the type of battery is changed, to restore
factory default settings, to disable Tactical Momentary and to re-
enable Brightness Level Ramping and the Options menu.
Soft Reset
Soft Reset will not change any personal settings. Use if the light has
fallen into an unresponsive state.
1. Turn the light on.
2. Unscrew the battery case until the light turns off.
3. Screw the battery case back together; there will be one second
- 9 -
