8 of 14
SCU-xDR-DSP-M1.0 Manual
Revision: 2 - Date: 24-01-2022
Basic Controls
Below you find some of the basic controls that are on almost all panels.
Power button
ON
Press and hold for 1 second to start up the system. This will start up
both the DVR3 and the xDR
OFF
Press and hold for 1 second to shut down the system. This will shut
both the DVR3 and the xDR down.
Speaker button
This uses a “Stay put push button”, this means that once you press it, it will
remain in that position.
Speaker ON
Button Pushed in
Speaker OFF Button out
Rackmount units
The SCU-xDR-DSP-M1.0 is best combined with other Novasub rackmount units. How to connect these units to each other
can be seen in the schematic on the next page.
