NovaStar NovaPro UHD Jr, Руководство пользователя

Страница: 30 / 36

NovaPro UHD Jr All-in-One Controller
User Manual 5 Menu Operations
www.novastar.tech 25
Figure 5-22 HDR effect
Step 1 Choose Advanced Functions > HDR > Status to enable the HDR function.
Step 2 Rotate the knob to adjust the value of each parameter to improve the image quality.
Menu Description
Peak Screen Brightness Adjust the screen brightness under normal operation.
The range is 100
–1000 and the default setting is
1000 .
Ambient Brightness Display the ambient brightness. The range is 0
–200
and the default setting is 30 .
Low Grayscale Mode The range is 0
–50 and the default setting is
15 .
Step 3 (Optional) Select Reset to reset all the parameters to default values.
Note:

Only HDR10 input source is supported.

When HDR function is enabled, the output loading capacity will be reduced by
50%.
5.8.2 Low Latency
Low latency reduces the input source signal latency from input to output image of the
NovaPro UHD Jr. This function can reduce the latency from sending card to receiving
card by 2 frames when the device is used together with NovaStar Armor series
receiving cards.
Note:

The loading width of a single Ethernet port should be no greater than 512 pixels
when low latency function is used.
 The supported Armor series receiving cards include A8, A8s, A9s and A10s Plus.
5.8.3 OPT Mode
The NovaPro UHD Jr supports two OPT modes: Hot Backup (default) and Copy .

Hot Backup: Optical fiber ports 3/4 backup the data of optical fiber ports 1/2.

Copy: Optical fiber ports 3/4 copy the data of optical fiber ports 1/2.
Hot Backup
Step 1 Perform the hardware connections for hot backup mode.
XI'AN
NOVASTAR
TECH
CO.,
LTD.