KU20 LED Display Controller User Manual
www.novastar.tech
12
6.2
Set Internal Input Sources
Select the internal source stored in the device and set the related parameters for screen testing and troubleshooting.
On the main menu screen, choose
Input Settings
>
Internal Source
>
Image
.
Figure 6-7 Internal source
Select a static picture or a motion picture.
When the relevant parameters of the image are displayed, set the parameters according to your actual needs;
otherwise, please skip this step.
Press the
BACK
button to go back to the upper-level menu and select
Resolution
.
Set
Mode
to
Custom
or
Standard
, and then set the resolution, frame rate and bit depth.
Figure 6-8 Resolution parameters
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
After the settings are done, select
Apply
and press the knob.
6.3
Set Output Parameters
6.3.1
Adjust Screen Brightness
Adjust and save the screen brightness.
On the main menu screen, select
Screen Brightness
and then the brightness value becomes editable.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
