NovaScale r410 e1, Руководство пользователя

Страница: 175 / 325

User Guide
175
www.bull.com
Removing a Hard Disk Drive
1. Make sure the power switches for the computer, video monitor and any
peripheral devices are turned OFF and unplug the power cord (see “General
Safety Information” on page 132 ).
2. Disconnect the monitor and peripheral devices (printers, for instance) from the
system.
3. Remove the server cover. Refer to “Removing the Server Cover” on page 160 .
4. Disconnect the power and data cables from the drive.
- HDD1 location only: Slide the power cable from the cable clip that is
located on the top of the hard drive carrier.
5. Remove the screw that holds the hard drive bracket to the chassis. See letter
“A” in the figure below.
Note: Save this screw. You will use it to reinstall the drive
assembly later.
6. Lift the drive carrier from the chassis. See letter “B” in the figure.
Figure 121: Removing the Drive Carrier
7. Remove the four screws that attach the hard drive to the drive carrier.
8. Lift the drive from the carrier. Store the drive in an anti-static bag.
Caution
About data on the hard disk drive:
Be sure to take appropriate measures not to leak important data
(e.g., customers' information or companies' management infor-
mation) on the removed hard disk drive to any third parties.
Data seems to be erased when you empty the Windows "Recy-
cle Bin" or execute the "format" command of the operating sys-
tem. However, the actual data remains written on the hard disk
drive, and can be restored by special software and used for
unexpected purposes.