Novanta JADAK FM-8, Руководство пользователя

Страница: 63 / 89

JADAK FM-8/FM-9 User’s Manual
Data Matrix
Data Matrix Defaults
To set the default values for Data Matrix, scan this code:
Data Matrix On/Off
Scan one of the codes below to enable or disable Data Matrix. Default = Enabled.
* Enable Disable
Data Matrix Minimum and Maximum Length
Use the following commands in combination with numerical values to set the minimum
and maximum length for allowed Data Matrix barcodes.
Default minimum length = 1. Default maximum length = 3116.
The minimum and maximum length for this symbology can be set either by sending the
serial command shown under the barcodes below with a value between 1 and 3116, or
by scanning one of the barcodes below and then set the length by scanning the digit
codes and the SAVE barcode in Appendix B .
Please contact JADAK if assistance is needed.
Data Matrix Minimum length Data Matrix Maximum length