Novanta Fiber Tiger, Руководство пользователя

Страница: 50 / 62

44
FIBER_TIGER_manual, 2021-11-29
NOTICE
Voltage peaks and leakage currents, when hot plugging the power supply,
destroy the scan head electronics.
• Before connecting the power supply to the scan head or disconnecting
it from the scan head, ensure that no voltage is being applied to the
connecting cable.
7.1. Decommissioning 7. Decommissioning, returning and disposal
Procedure
1. Disconnecting the fiber:
a) Unfasten the fiber from the fiber stress relief.
b) Pull and turn the bayonet ring against direction 2; see figure 7.1 on page 44,
and push it.
Figure 7.1.: QBH fiber coupling with plugged in fiber
c) Turn the bayonet ring against direction 1; see figure 7.1 on page 44.
d) Pull the fiber from the fiber coupling.
e) Immediately and carefully plug the protective caps on fiber tip and fiber coupling
in order to prevent contamination.
f) Fix the protective cover to the laser beam exit.