NOVAKON CD-100, Руководство оператора

Страница: 10 / 28

•
From the desk top, you may select the appropriate icon to start your Bob CAD/CAM software
or you can start the MACH3 Mill Program.
•
Refer to the applicable operation manual for the operation of the software.
4.5 Installations
Now that your CD-100 has been set-up, you are ready to install your control system. If you purchased a
Mach 3 system or PC Ready System, please refer to the documentation sent with your controller. If you
have purchased the base machine, we have supplied you with a set of plugs that match the sockets on
the junction box of the bed mill. You will be able to use these to wire your control system of choice to
your bed mill. Please refer to the installation diagram below for easy guide.
Figure 4.5 Installation Diagram