Parts out of the box:
(Be sure all parts are included before assembling)
(1) Seat
(see image 1)
(4) Legs
(2) Arms
image 1
image 2
Step 1:
Place the seat face down on a level surface.
(see image 2)
Step 2:
Insert the four leg tubes into the frame. Depress the brass push pin and push the tube in until the
pin fully engages in the frame hole.
(see image 3)
Step 3:
Place the chair upright so that it is resting on all four legs and insert the arms into the frame.
Depress both push pins in and push down until the pins fully engage in both frame holes.
(see image 4)
Repeat this step for the opposite arm. (Note: Arms should bend back towards the
chair and not away from the chair.)
Step 4:
Use the push buttons to adjust the stool to the desired seat height. Be sure the bench is level and
stable before using and that all push buttons are fully engaged.
image 3
image 4