11
Hook the open end of the “S-HOOK” through the center hole of the “SPREADER
BAR”.
NOTE: Check with your physician on placement either facing away from or
facing towards door and place accordingly
12
Unfasten the Velcro straps of the “HEAD HALTER” and
slip head through the opening. The part of the “HEAD
HALTER” that has the straps sewn onto it goes behind
the head. The Velcro straps should hang down.
On the opposite end of the “HEAD HALTER”, place chin on the padded portion of
the chin rest. Bring the Velcro straps under the ears and fasten the Velcro straps
underneath the chin rest along the jaw.
Place the metal D-rings of the “HEAD HALTER” evenly into one of
the three slots located on each side of the “SPREADER BAR”.
The D-rings must be placed into the same slot on each side of
the “SPREADER BAR”. If necessary, position a straight-back chair
against the door underneath the bracket and pulley assembly.
Otherwise, patient should stand under the bracket and pulley
assembly facing away from or towards the door.
NOTE: Each slot on the “SPREADER BAR” provides various
degrees of tension.
13
14
Velcro strap
How to care for your: Overdoor Cervical Traction Set
At the top of the “WEIGHT BAG”, open the red drainage cap and completely drain the
water. Once drained, leave the red drainage cap open to allow the bag to air dry. After
the “WEIGHT BAG” has dried, store the bag either flat or rolled. DO NOT fold the bag.
Doing so can cause damage to the bag.
The ”TRACTION ROPE” and “HEAD HALTER” can be hand washed in cold
water. DO NOT machine wash or use harsh cleansers or bleach. Hang to air dry.
Cut out this Do
Not Enter sign
and hang on door
for safety when
using the
OverDoor
Traction Set.