background image

American Tug 34 Owner Experiences 

 

Chapter 10 Galley 

Page 10-1 

 

Chapter 10 Galley 

Refrigerator 

Manufacturer 

Nova Kool Manufacturing Inc. 
Website 

http://www.novakool.com/

 

Phone (604) 523-6515  (This is an International call from the US). 
FAX (604) 523-6674 
Email:  [email protected]  

[email protected]  
[email protected] 

 
Address  

1578 Hartley Avenue 
Coquitlam, BC 
Canada  V3K 7A1 

 
The model and serial number is located on a silver sticker on the inside of the refrigerator 
on the left hand side. 

We have a model RFU8000 which is a 6.8 cubic foot fridge/freezer combo with the 
refrigerator on top and the freezer on the bottom. 

Defrosting 

The refrigerator needs to be defrosted when ¼ inch of ice forms on the cold plate which 
is located in the top of the refrigerator compartment. This ice tends to insulate the 
components, and prevent efficient cooling. In really warm weather we do this every 
week. 

If the fridge needs defrosting often, check the door seal and the latch. If the bottom corner 
has a small gap, adjust the latch receiver on the frame. 

Remove heavy objects from the door – it tends to distort this seal. 

Venting 

Tomco seem to have a blind spot about refrigerator venting: I guess it must be a Seattle 
cold-weather thing, as in hot climates the refrigerator on our boat was not been able to 
maintain the ideal 38-40deg F temperature. It was running closer to 50 deg, which was 
turning much of our food into science experiments…. 

When we called the helpful people at NovaKool, and told them it was an American Tug, 
they right away said “It needs more venting”. They’ve seen this issue before (both with 
American and Nordic Tugs !). NovaKool specifies a total of 120 square inches of 
ventilation for the type of fridge that we have (60 square inches at the top for venting out 
the hot air and 60 square inches at the bottom for letting in the cooler air). This is actually 
specified in the user’s manual on page 4. On my boat (hull #48) there is a narrow grill 
above and below the fridge for ventilation. This provides about 80 square inches in total 

Содержание American Tug 34










Отзывы: