4
OPERATION
b) When the red light is on, insert the
battery into the charging compartment.
c) Battery is fully charged when the red
and green light are solid. Charging time
is approximately 30 minutes.
d) Charge the battery at least once a
month to prolong the life of the battery.
EXTENDING BATTERY LIFE
a) Charge the battery at least once a
month, even if you have not used it in
order to increase the lifetime.
b) Remove the battery from your tool
after each use and before storing to
increase its life.
The charging procedure starts as soon
as the mains plug of the battery charger
is plugged into the socket outlet and
the battery is inserted into the charging
the battery is inserted into the charging
compartment. Due to the intelligent
charging method, the charging condition
of the battery is automatically detected
and the battery is charged with the
optimum charging current, depending
on battery temperature and voltage.
When the battery is not inserted,
continuous red lighting of the battery
charge indicator indicates that the
mains plug is inserted in the socket
and that the battery charger is ready for
operation.
NOTE:
The rapid-charging procedure
is only possible when the battery
temperature is within the allowable
charging temperature range.
CHARGING PROCEDURE
a) To charge the battery, plug the charger
into the socket outlet.
NOTE: Observe the mains voltage!
The voltage of the power supply
must correspond with the data
given on the nameplate of the
battery charger.
Battery chargers marked with 230 V
can also be operated with 220 V.
!
