Nova Florida LIBRA DUAL BTFS 24, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 28

12
3.1. Installation standards
The boiler is rated II2H3+ and is to be installed in com-
pliance with laws and standards enforced in the country of
installation.
3.2. Installation
3.2.1. Packaging
Boiler is shipped in a sturdy cardboard box. Remove boiler
from cardboard box and check on its integrity. The packing
materials can be recycled. They are to be disposed of
through appropriate waste management sites.
Keep packaging out of the reach of children, as it may be
dangerous.
Manufacturer shall not be held responsible for harm to peo-
ple and/ or animals, and/or damage to property due to fai-
lure in following the above mentioned instructions.
Packaging includes the boiler and:
- kit for gas/water connection and bicones;
- one copper pipe kit for boiler hydraulic and gas connec-
tion.
- one plastic bag containing:
a) installation, use and maintenance manual
b) boiler wall mounting template
c) metal bracket supporting boiler on the wall
d) screws and wall plugs for fixing the boiler to the wall
e) in BTFS 24 model packaging: three diaphragms for flue
gas exhaust (40, 42, and 45 mm diameter)
f) in BTFS 28 model packaging: three diaphragms for flue
gas exhaust (44, 47 and 49 mm diameter)
g) in BTFS 32 model packaging: four diaphragms for flue
gas exhaust (45, 47, 49 and 51 mm diameter)
h) two closing caps with gaskets (see pic. 10 and pic. 12).
3.2.2. Choosing where to install the boiler
The following must be taken into account when choosing
where to install the boiler:
- “Air/flue gas system” paragraph instructions (3.2.6).
- Check the wall for sturdiness according to boiler weight.
- Do not fit the boiler above any equipment that may preju-
dice proper operation (steam and grease vapour emitting
kitchen appliances, washing machines, etc.).
3.2.3. Positioning the boiler
Each boiler is supplied with a “TEMPLATE” allowing to po-
sition the couplings from the CH system, DHW system and
gas supply to the boiler before installing the boiler itself.
The TEMPLATE is made of heavy duty paper and is to be
affixed to the wall where the boiler is to be mounted. It pro-
vides all the indications required to drill the holes for fixing
the boiler to the wall, which is done using two screws and
wall plugs.
The lower section of the TEMPLATE shows where to mark
the exact spot where the couplings are to be positioned for
boiler connection to the gas supply pipe, water mains sup-
ply pipe, DHW flow pipe, CH flow and return pipes.
Since the temperature of the walls on which the boiler is
mounted and the temperature of coaxial flue system does
not exceed 60°C, no minimum distance from flammable
walls need to be respected.
For boilers with split pipe flue system, in presence of flam-
mable walls and flue gas system through such walls, ensu-
re proper insulation between wall and flue gas pipes.
3.2.4. Installing the boiler
Before connecting the boiler to CH and DHW networks,
clean the pipes carefully and remove any metallic leftover
matter from manufacturing and welding process, and any
oil or grease deposit. Such foreign substances might da-
mage the boiler or alter its function by interfering with boiler
operation.
NB: Do not use solvents as they could damage system
components.
Manufacturer shall not be held responsible in case of harm
to people and/or animals, or property damage due to failu-
re in following the above mentioned instructions.
In order to install the boiler proceed as follows.
- Affix template to the wall
- Drill four holes in the wall to accommodate boiler support
bracket wall plugs
- Arrange air/flue gas system path in the wall
- Secure boiler support bracket to the wall using 4 screws
- Position gas supply network pipe, water mains supply
pipe, DHW flow pipe, and CH flow and return pipes as
shown on the template (see template lower area)
- Position the boiler on its wall-fixed support bracket
- Connect the boiler to network pipes by means of the pipe
kit supplied with the boiler
- Connect the boiler to the air intake and flue gas exhaust
system
- Connect electrical power supply and room thermostat (if
available).
3. Instructions for the fitter