Nouveau NHFE320, Руководство по эксплуатации

Страница: 7 / 12

Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This heater needs minimal
assembly before first use. Please follow the below instructions.
WARNING:
In order to avoid overheating or fire, do not cover the heater.
WARNING:
Keep all objects at least 1 metre from the front and 150mm
from the sides of the appliance.
WARNING:
Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:
Never leave this heater unattended while in use.
Ensure heater is mounted on a heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet.
CAUTION:
Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.
HEATER CONTROL SWITCH
The control switch positions are:
O/I
On/Off dimmer switch
900W Low Heat Mode
1800W High Heat Mode
Press the O/I button once to turn on the appliance and fire effect. A red indicator light will show to
indicate that the fire is ON.
Press the O/I button for 3 seconds this will operate the dimmer mode, hold the button down until
the desired brightness is obtained.
Press the 900W button once for the low heat setting; press twice to switch off the heat setting.
Press the 1800W button once for the high heat setting; press twice to switch off the heat setting.