•
The appliance must not be immersed in any liquids.
•
There are no user serviceable parts installed in the unit.
•
Do not place the unit in wardrobes or other enclosed spaces as this may cause
fire hazards.
•
This unit is not supposed to be used in or around locations where foodstuffs,
works of art or delicate articles of science, etc. are stored.
•
If your appliance does not work, or is not working properly, contact the place of
purchase or the Customer Services Team.
General Care and Safety Guide
Assembly Instructions
WARNING:
Heater must not be used without the feet fitted.
This appliance has been supplied with
‘
1 way
screws’
for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.
ASSEMBLY OF HEATER
•
Carefully turn the Main Body upside-down on a
scratch-free and stable surface.
Be careful to
prevent damage to the cosmetic finish or your floor
surfacing.
•
Attach the feet to the base of the heater by aligning
on the bottom ends of the heater side moldings.
•
When the screw holes on the feet and heater body
are aligned then fix screw in place. Use two screws
for each foot.
Feet x 2
Main Body x 1
One-way Screws x4
