4
Remote Control Assembly
The Remote Control requires 2 AAA batteries (not supplied) for operation.
To install the batteries, simply depress the back of the remote, with your thumb
in the indentations, and remove the cover. Insert the batteries according to the
diagram shown inside. Replace the cover.
•
•
•
•
Operating instructions / Drawings
Right / Left Control
(see fig. 1/2)
Press RIGHT/ LEFT button once, indicating light on, the inner louver of air cooler
begins to swing horizontally. Push again, light off, inner louver stops swinging.
Meantime, if you push the louver vertically by hand, air cooler can change to
blow air vertically.
Timer Control
(see fig. 1/2)
To start and stop the timer, press the Timer button on the remote control or
control panel to cycle through the timer settings. Time is added 0.5hr till 7.5hrs.
If 30Mins and 1 hour lights on at the same time, it means 1. 5 hours. If no, it
means air cooler works without time limit.
Cool Control
(see fig. 1/2)
Press the COOL button once on the remote control or control panel to operate
the cool function. This function begins the process that the air cooler soaks the
water curtain in water so that normal air blown out will be cooler after passing
through the air filter and water curtain. Ice can be added into water of the
water tank to improve the cooling performance. Press the button again to
Set the fan on a dry level surface.
Plug the cord into a suitable 220-240V AC outlet.
Turn the fan on by pressing the ON/OFF button – on the remote control or
on the control panel of the product (see fig. 1/2). Turn the unit Off bypressing
the ON / OFF button again.
The speed is adjusted by pressing the Speed button on the remote control
or on the control panel. Press the Speed button, choose wind speed from
“High-Medium-Low” in turn, relative indicating lights will illuminate.