Notifier NOTI-FIRE-NET Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

Notifier NOTI-FIRE-NET Скачать руководство пользователя страница 6

Service Provided

6

NOTI•FIRE•NET™ PN 50257:E 7/5/01

•

Fiber Optic Cable - MIB-F

•

Twisted Pair Wire and Fiber Optic Cable MIB-WF

Each MIB has two communication ports. The MIB-W has two twisted pair wire ports, the MIB-F
has two fiber optic cable ports and the MIB-WF has one twisted pair wire and one fiber optic cable
port.

The NAM-232 provides a physical communication interface from the AFP-200, AFP-300/AFP-
400, AM2020/AFP1010 Analog Fire Panel to the following communication media which connect
nodes together forming a network:

•

Twisted Pair Wire NAM-232W

•

Fiber Optic Cable NAM-232F

The Serial Interface Board for

NOTI•FIRE•NET™

(SIB-NET) connects an AM2020/AFP1010

to the network through a MIB and permits communication between the AM2020/AFP1010 and
other nodes on the network. The SIB-NET supports all of the same functions as the SIB-2048A;
i.e. Annunciator Control System (ACS), printers, and CRTs.

Each AM2020/AFP1010 requires a network node address.

The NRT-NET interface card and the MIB allow the NRT and NCS to communicate with the
network. The NRT-NET interface card plugs directly into a computer expansion slot located on the
NRT and NCS. The MIB, which supports the physical connection to the network, plugs onto the
NRT-NET card to complete the network interface. Each NRT or NCS requires a network node
address.

The Repeaters (RPT) boost data signals between network nodes extending communication
distances. The RPT-W supports twisted pair wire, the RPT-F supports fiber optic cable, and the
RPT-WF supports twisted pair wire and fiber optic cable.

Service Provided

NOTI•FIRE•NET™

, when properly configured, is suitable for use as a Protected Premises Fire

Alarm System as defined in the National Fire Protection Association (NFPA) 72 documentation.

Related Documentation

To obtain a complete understanding of specific features within the network, or to become familiar
with the network functions in general, make use of the documentation listed in Table 1.

Table 1 Network Related Documentation

For information on…

Refer to…

Part No.

Noti•Fire•Net Nodes

AM2020/AFP1010 Manual
AFP-300/400 Fire Panel Installation Manual
AFP-300/400 Fire Panel Programming Manual
AFP-300/400 Fire Panel Operations Manual
AFP-200 Analog Fire Panel Manual

15088
50253
50259
50260
15511

Off-line programming utility

Veri•Fire Tools Help File

Verifire-CD

Networking

Noti•Fire•Net

3.0 Manual Manual

NCS Network Control Station
INA Intelligent Network Annunciator Manual
NAM-232 Manual
MIB Media Interface Board Manual
RPT Repeater Manual

50257
51095
15092
50038
50255
50256

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

«
...
4
5
6
7
8
...
»

Содержание NOTI-FIRE-NET

























Отзывы:

Нет отзывов