background image

4

NFS2-640/E Installation Manual —

 P/N 52741:P2  7/10/14

Software Downloads

In order to supply the latest features and functionality in fire alarm and life safety technology to our cus-
tomers, we make frequent upgrades to the embedded software in our products.  To ensure that you are 
installing and programming the latest features, we strongly recommend that you download the most cur-
rent version of software for each product prior to commissioning any system.  Contact Technical Support 
with any questions about software and the appropriate version for a specific application. 

Documentation Feedback

Your feedback helps us keep our documentation up-to-date and accurate.  If you have any comments or 
suggestions about our online Help or printed manuals, you can email us.

Please include the following information:

Product name and version number (if applicable)

Printed manual or online Help

Topic Title (for online Help)

Page number (for printed manual)

Brief description of content you think should be improved or corrected

Your suggestion for how to correct/improve documentation

Send email messages to:

[email protected]

Please note this email address is for documentation feedback only.  If you have any technical issues, 
please contact Technical Services.

Содержание NFS2-640/E















































































Отзывы: