manualshive.com logo in svg

Notifier AUTOPULSE IQ-318, Руководство пользователя

Поделиться
Скачать
Notifier AUTOPULSE IQ-318 Скачать руководство пользователя страница 7

IQ-318/E/C Installation Manual —

  P/N 52864:J3  9/29/15 

7

UL 864 Compliance

About This Manual

•

C22.1-98 The Canadian Electrical Code, Part 1

1.2  UL 864 Compliance

1.2.1  Products Subject to AHJ Approval

This product has been certified to comply with the requirements in the Standard for Control Units 
and Accessories for Fire Alarm Systems, UL 864 9th Edition. 

The following products have not received UL 864 9th Edition certification and may only be used in 
retrofit applications. Operation of the IQ-318/E with products not tested for UL 864 9th Edition has 
not been evaluated and may not comply with NFPA 72 and/or the latest edition of UL 864. These 
applications will require the approval of the local Authority Having Jurisdiction (AHJ).

•

For a complete list of all peripherals that can be used with this fire alarm control panel (FACP), 
and which of those peripherals have not received UL 864, 9th Edition certification and may 
only be used in retrofit applications, see Section 2.3, “Compatible Equipment”, on page 15. 

1.3  Related Documents 

Table 1.1 below provides a list of documents referenced in this manual, as well as documents for 
selected other compatible devices. The document series chart (DOC-ANS) provides the current 
document revision. A copy of this document is included in every shipment.  

Compatible Conventional Devices (Non-addressable)

Document Number

(Part no. if applicable) 

Device Compatibility Document

50054

Fire Alarm Control Panel (FACP) and Main Power Supply Installation

Document Number

(Part no. if applicable) 

IQ-318/E Installation, Operations, and Programming Manuals
IQ-318C Canadian Applications Addendum

52864, 52865, 52866

52864CDN

AutoPulse SLC Wiring Manual

52184 (432780)

Note: For individual SLC Devices, refer to the 

SLC Wiring Manual

Off-line Programming Utility

Document Number

(Part no. if applicable) 

VeriFire® Tools CD help file

AP-TCD

Power Supplies, Auxiliary Power Supplies & Battery Chargers

Document Number

(Part no. if applicable) 

ACPS-2406 Installation Manual

51304

ACPS-610 Instruction Manual

53018

APS-6R Instruction Manual

50702

APS2-6R Instruction Manual

53232

CHG-120 Battery Charger Manual

50641

FCPS-24S6/FCPS-24S8 Field Charger/Power Supply Manual 

51977

AUTOPULSE-NCA-2 Network Control Annunciator Manual

52857

ANSUL-NCA Network Control Annunciator Manual

52185 (432781)

Table 1.1  Reference Documentation (1 of 2)

Содержание AUTOPULSE IQ-318































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды