Nothern Industrial tools 331804, Руководство пользователя

Страница: 4 / 15

• Remove adjusting keys and wrenches. Always check that adjusting keys and wrenches
are removed from the tool before operating the tool.
• Extension cords. Before use inspect the extension cords and replace if damaged. When
using the tool outdoors, only use extension cords intended for outdoor use and marked
accordingly.
• Use appropriate tool. The intended use is described in this instruction manual. Do not
force small tools or attachments to do the job of a heavy duty tool. The tool will do the job
better and safer at the rate for which it was intended. Do not force the tool.
WARNING! The use of any accessory or attachment, or performance of any operation
with this tool other than those recommended in this instructionmanual may present a risk of
personal injury.
• Check for damaged parts. Before use carefully check the tool and power cord for
damage. Check for misalignment and seizure of moving parts, breakage of parts, damage
to guards and switches and any other conditions that may affect its operation. Ensure that
the tool will operate properly and perform its intended function. Do not use the tool if any
parts are damaged or defective. Do not use the tool if the switch does not turn it on and off.
• Unplug the tool. Shut off the power and wait for the tool to come to a complete standstill
before leaving it unattended. Unplug the tool when it is not in use, before changing any
parts of the tool, accessories or attachments and before servicing.
• Avoid unintentional starting. Do not carry the tool with a finger on the on/off switch.
Make sure the tool is switched off when plugging in.
• Do not abuse the cord. Never carry the tool by its cord or pull it to disconnect from the
socket. Keep the cord away from heat, oil and sharp edges.
• Connect dust extraction equipment. If devices are provided for the connection of dust
extraction and collection facilities, ensure that these are connected and properly used.
• Store idle tools. When not in use, tools should be stored in a dry, locked up or high place,
out of reach of children.
• Maintain tools with care. Keep tools clean and in good condition for better and safer
performance. Follow the instructions for maintenance and changing accessories. Keep
handles and switches dry, clean and free from oil and grease.
3