Nothern Industrial tools 155305 Скачать руководство пользователя

Страница: 11 / 14

MAINTENANCE

WARNING!

For your own safety, turn switch “off” and remove plug from power source outlet before

maintaining or lubricating your drill press.

WARNING!

To avoid shock or fire hazard, if the power cord is worn or cut, or damaged in any way, have

it replaced.

WARNING!

Make sure this tool is disconnected from its power source before attempting any maintenance,

cleaning, or inspection.

• Maintain your tools.

It is recommended that the general condition of any tool be examined before it is used.

Keep your tools in good repair by adopting a program of conscientious repair and maintenance in accordance

with the recommended procedures found in this manual. If any abnormal vibrations or noise occurs, turn the

tool off immediately and have the problem corrected before further use. Have necessary repairs made by

qualified service personnel.

• Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control. Keep handles dry, clean, and free from oil and grease.

• Cleaning.

Use only soap and a damp cloth to clean your tools. Many household cleaners are harmful to

plastics and other insulation. Never let liquid get inside a tool.

WARRANTY

One-Year Limited Warranty

For warranty questions, call 1-800-222-5381

Содержание 155305















Результаты поиска

Содержание 155305

Отзывы:

Похожие инструкции для 155305

Бренды по названию

Популярные бренды

Nothern Industrial tools 155305, Руководство пользователя

Результаты поиска

Содержание 155305

Отзывы:

Похожие инструкции для 155305

Бренды по названию

Популярные бренды