Page of 12
8
HOW TO USE THE SELF-LOCKING TRIGGER
The Rechargeable Grease Gun comes with a self-locking trigger to help avoid having the trigger
pressed by accident, causing an unwanted grease spill. To stop unwanted spills,, turn the button
position from 'Unlock' to 'Lock' (See Figure 2).
NOTE:
Do not press the trigger when the button is in the 'Lock' position, this could destroy the
self-locking device.
HOW TO FILL THE GUN FROM A BULK CONTAINER
1) Remove pump assembly (#7) from grease tube assembly (#9).
2) Pack lubricant into cavity of the pump assembly.
3) Insert the open end of the grease tube assembly into lubricant. Slowly pull the follower
handle back while pushing the grease tube assembly deeper into the lubricant to prevent air
pockets from being pulled into the grease tube assembly (See Figure 3).
4) When the follower rod is fully extended, it will latch onto the locking lever.
5) Loosely assemble the pump assembly to the grease tube assembly. Press the locking lever
while pushing the follower rod into the grease tube assembly. Slowly unscrew the grease
tube assembly from the pump assembly until lubricant oozes from the interface. Tighten
grease tube assembly into the pump assembly.
HOW TO FILL THE GUN WITH A FILLER PUMP
1) Insert the gun filler nipple (# 7) into the filler pump socket (See Figure 4). Operate the filler
