MODULAR
CART
PARTS LIST
Allen wrench
included
A (1)
B (1)
C (1)
D (4)
E (1)
F (1)
G (2)
H (4)
I (2)
J (2)
K (2)
L (2)
M (2)
A
M
C
D
E
F
G
H
I
J
L
B
K
H
MODULAR CART
ASSEMBLY INSTRUCTIONS
CART CONFIGURATION
(Horizontal transportation)
1. Unpack contents of box onto a flat surface
2. Locate bottom frame (A)
3. Insert axle (E) through the bottom frame (A)
4. Position washer (H) on the axle (E)
5. Position wheel (G) on the axle (E)
6. Add second washer (H) to the outside of the wheel (G)
7. Secure cotter pin (I) through the axle end (E)
8. Repeat process with opposite side
9. Connect middle frame extension (C) to bottom frame (A),
secure frames with (2) bolts (J), (2) washers (K), and (2) nuts (L)
using the provided wrench. (Note: frame extension (C)
contains 2 positions for custom length, ensure the
kick-plate is resting on the ground during assembly)
10. Connect top handle (B) to middle frame extension (C)
with (2) “L“ shaped bolts (M), handle should face up
11. Insert (4) uprights (D) into bottom frame (A) by pulling the
spring release pins located below the receiver
12. Tighten and check all connections
DOLLY CONFIGURATION
(Vertical transportation)
1. Follow steps 1-9
2. Insert lift-plate (F) into bottom frame (A) by pulling the spring
release pins located below the receiver, pins can be locked in
the open position by turning the dial
3. Re-engage spring pins to fully lock the lift-plate
4. Position cart in vertical position with lift-plate resting
on the ground
5. Connect top handle (B) to middle frame extension (C) with (2)
“L“ shaped bolts (M) (Handle should be facing towards the
operator)
6. Tighten and check all connections
SOLD SEPARATELY
( item# 40709 )
