8
Connect to iPad
• Turn on your iPad and
connect it carefully to the
iPad dock connector of the
scanner. Make sure it sits
fi
rmly in place.
Power On / Off
• Press
the Power
button to turn on
the scanner. To turn
off, long press for
a
few seconds then
release the button.
Description
Power LED Status
Power On
Blinking, then steady blue
Power Off
Off
•
Do not dock/un-dock iPad to the scanner when
the power LED is blinking. Wait until the blinking
stops.
•
Check the battery level in the upper-right corner
of your iPad Home screen. Make sure it is above
20% at least when docked. If not, please charge
the battery prior to docking.
•
To avoid the possible interruption during
scanning, please turn off the Noti
fi
cation function.
In iPad Settings, tap Noti
fi
cations, then turn
Noti
fi
cations off. Refer to your iPad User Guide
for more details.
• The scanner will turn off automatically after
iPad locks and sleeps for about 1.5 minutes.
To turn on the scanner, press the
Power
button. Then wake iPad.
