ENGLISH
8
CLEANING & MAINTENANCE
Daily Cleaning
1.
Make sure appliance is turned off, unplugged and completely cooled before cleaning.
2.
Remove the Filter Basket and Carafe, and wash them
warm, sudsy water. Dry parts thoroughly.
3.
Using a slightly damp, non-abrasive sponge, towel or cloth, wipe the exterior
surface of the coffee maker. Wipe with a non-abrasive towel to dry.
4.
Use a damp cloth to gently wipe the surface of the Warming Plate.
Never use abrasive cleaners to clean the Warming Plate.
NOTE: To protect against electrical shock and damaging the
appliance, do not immerse the cord, plug or unit in any liquid. Never
place any parts in the dishwasher. Always wash by hand.
Mineral Deposits / Decalcifying
Minerals found in water, such as calcium and limstone, will leave deposits in your
coffee maker and affect its performance. To keep your RETRO 12-CUP COFFEE MAKER
operating efficiently, it is recommended that you regularly remove these deposits.
The frequency is dependent upon whether you are using
hard or soft water, and how often you brew.
Suggested Decalcifying Interval
•
Soft water.............Every 80 Brew Cycles
•
Hard Water...........Every 40 Brew Cycles
1.
Using a store-bought coffee maker descaler, fill the Water Tank to the MAX level with
a solution of water and descaler in accordance with the descaler instructions.
2.
Place a coffee filter into the Filter Basket (without coffee grounds), close
the Top Cover, and place the Carafe onto the Warming Plate.
3.
Press the ON/OFF button. The BREW indicator light will
illuminate and begin the brewing cycle.
4.
When finished brewing, turn off the coffee maker.
5.
Allow the solution to sit for 15 minutes, then discard the
solution. Repeat steps 1-4 one more time.
6.
Finally, rinse the coffee maker by operating with only water and repeat at least three times.
Содержание RCOF120
Страница 3: ......
