Nostalgia Electrics MDF200, Инструкция и рецепты

Страница: 12 / 16

ENGLISH
10
Reassemble your AUTOMATIC MINI DONUT FACTORY™ . 11.
By following these simple instructions, your AUTOMATIC
MINI DONUT FACTORY™ will be a fun and special treat
for your family, friends and kids of all ages!
To prolong the life of your AUTOMATIC MINI DONUT FACTORY™, be sure
to follow the cleaning instructions above after each and every use.
BREAKDOWN OF DOUGH DISPENSER FOR CLEANING:
Put your finger on the plunger as you turn the donut hopper over. You should 1.
notice the Dough Release is extended. Unscrew this part. See illustration below.
Using your thumb and first finger, firmly pull up on 2.
one end of the ‘wings’, releasing it from the outer
edge. Now, release the second ‘wing’ the same way.
Now you can remove the plunger and stem assembly. 3.
Turn the Dough Dispenser over and press in to 4.
release inside peice from inside mixer.
You should now have all four parts to the Dough Dispenser released 5.
for cleaning. Wash in warm, soapy water. You may need to push the
plunger down exposing the lower threaded stem and confirm that
the stem portion above the threads is clean and smooth.
Reassemble after cleaning and drying. 6.
Plunger
Outer Edge
Wing
Dough Release
NOTE: You may find it
necessary to use a small,
fine brush to clean the
hardened and caked
donut batter from cracks,
crevices and the spring
on the trigger stem.