Nostalgia Electrics All-League Sliders SM-500, Инструкция и рецепты

Страница: 6 / 16

ENGLISH
4
PARTS & ASSEMBLY
After Taking the Unit Out of the Box:
Take the ALL-LEAGUE SLIDERS™ electric grill out of the box and wipe down
the inside and outside of the unit with a non-abrasive cloth or sponge.
HOW TO OPERATE
CAUTION- ALWAYS MAKE SURE THE REMOVABLE DRIP TRAY IS FULLY
INSERTED INTO THE TRAY SUPPORT GUIDES BEFORE COOKING
Do not touch hot surfaces. Do not attempt to move the unit when it is hot.
Always allow to cool first. Lid is designed to prevent from closing unexpectedly.
When closing the Lid, first lift the Lid straight up until vertical and then
close the Lid. This unit is made of heat-resistant plastic on the outer shell.
The inside is die cast aluminum with non-stick coating. Find a stable surface
near an electrical outlet before starting. Make sure your cord is away from
any water source. If needed, it is acceptable to use an extension cord.
Before plugging in the unit, make sure the Drip Tray is in place. 1.
Find a flat, stable surface in an area that is well ventilated. 2.
Lightly coat the upper and lower Grill plates of the ALL- 3.
LEAGUE SLIDERS™ with vegetable oil.
Plug into a power source. 4.
When plugged in, a light will come on to confirm that the power is on 5.
and unit is preheating. Wait about 3 minutes for the unit to preheat.
NOTE – The light will always stay on when the unit is plugged in.
Unit will get hot – always use an oven mitt or potholder while operating. 6.
Using the back end of the Forming Tool Spatula, scoop meat and 7.
Lid
Grill
Drip Tray
Forming Tool
Spatula