16
Figure 9 Microswitch Mounting Location
Figure 10 Microswitch Installation
3. Install the toggle arming switch (32) in the vehicle interior, within easy reach of the driver.
4. Connect terminal #1 (labeled “volts”) on the arming switch to an ignition sw12V source, using the fused red wire
provided.
NOTE:
When selecting an ignition sw12V source, ensure that your source is capable of handling the amperage of the
fuse provided with the kit.
5.
Connect terminal #2 (labeled “accessory”) of the arming switch to one post of the throttle microswitch (either post will do),
with the blue wire provided.
