Norwood The Grain Handler 10, Руководство оператора, Страница: 62 / 130

3 - INSTALLATION
3-22
17. Adjust the "Motor Mount Belt Tension Lever"
57
so
the "Motor Mount Base" 55 is level or parallel with the
top of the U-Trough.
(See Fig. # 3-54)
Fig. # 3-54 Motor Mount Base Tension
55
57
18. Support the "Electric Motor" 58 , and install to the "Mo-
tor Mount Base" 55 . Secure with (Qty. 4) "3/8-16"X 2
Carriage Bolts 59 , "3/8 Flat Washers"
60
, & 3/8-16
Nylock Nuts" 61 .
(See Fig. # 3-55)
Fig. # 3-55 Mounting Electric Motor To MM Base
55
59
60
61
58
19. Install the "Upper Sheave" 62 , & "Keystock" 63 onto
the "Electric Motor" 58 shaft . Do not tighten the set-
screws at this time.
(See Fig. # 3-56)
Fig. # 3-56 Install Upper Sheave
58
63
62
20. Install the "V-Belts" 58 . If necessary adjust the "Motor
Mount Belt Tension Lever"
(See Fig. # 3-54)
to give
slack to install belts.
(See Fig. # 3-57)
Fig. # 3-57 Install V-Belts
58