Installation Instructions
•
If the cabinet is locked when first opened, the external power supply can be used to access it.
•
Slide the cover back and install four AA batteries, as illustrated on the bottom of the case.
•
Plug the connector into the bottom of the keypad.
•
After the lock start-up cycle is complete, press 1111# on the keypad. The display should now say
OPEN.
•
Turn the handle to open cabinet.
•
The manual key entry procedure on page 5 can also be used.
Step 1
–
Insert Batteries
•
Open the cabinet and remove the cover to the internal battery case by unscrewing the two
screws at the rear of the rubber mat.
•
Insert the four AA batteries as illustrated on the bottom of the case.
•
Replace the cover.
2
