Norwood Kwik-Till HSD2500, Руководство оператора

Страница: 59 / 154

3 - TRANSPORT OPERATIONS
3-15
CAUTION
When transporting the Kwik-Till on a road or highway at
night or during the day, use lights and devices to properly
warn the operators of other vehicles.
Follow local regulations for equipment lighting and marking.
Keep lighting and marking visible, clean, and in good
working order. Replace or repair lighting and marking that
has been damaged or lost.
Replacement lights and devices are available from your
Kwik-Till dealer.
17. Connect the Warning Light Plug
A
to the
Seven-Ter-
minal Outlet B
on the tractor.
(See Fig. # 3-38)
18. Verify correct operation of all warning lights.
19. To obtain maximum warning, be sure that warning lights,
reflectors, and SMV emblem are clean.
Fig. # 3-38 Connect Warning Light Plug
A
B
Using The Seven-Terminal Outlet
A Seven Terminal Outlet B is used to connect road lights,
turn signals, brake lights, & hazard lights.
(See Fig. # 3-39)
Always use auxiliary lights on towed implement when tractor
rear signals and other lights are obscured.
Refer to the following table for the Terminal Number A
definitions and their functions.
(See Fig. # 3-40)
A
B
1
7
6
3 5
4
2
Fig. # 3-39 Seven-Terminal Outlet Terminal Numbers
Terminal
Numbers
A
Function Wire Color
1 Ground White
2 Flood Light Black (Not Used)
3
Left Turn Signal &
Hazard Signal Lamps
Yellow
4 Brake Lights Red
5
Right Turn Signal &
Hazard Signal Lamps
Green
6 Tail Light Brown
7 Accessory Blue (Not Used)
Fig. # 3-40 Table: Seven-Terminal Outlet Terminal Numbers