3
PRESTIGE 2100
US
•
Keep cord away from heated surfaces.
•
NEVER operate spray tanning system if cord or plug is damaged.
•
As additional protection, the installation of a circuit protective device such as ALCI or
GFCI is recommended. Ask your installer for advice.
•
Connect to a grounded outlet and use grounded extension cords.
•
DO NOT use a 3 to 2 adapter.
•
The system is equipped with a thermal release which disconnects the system in case
of overheating. In this case, turn off the system, remove the plug and let the system
cool down for at least 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled
air filter, slots for air intake covered.
•
Unplug turbine before cleaning any parts.
•
Use only manufacturer authorized parts. User assumes all risks and liabilities when
using parts that do not meet the minimum specifications and safety devices of the
turbine manufacturer.
•
NEVER open the Spray Tanning System yourself to carry out electrical repairs!
•
DO NOT place the spray gun on its side, as material could leak out.
Grounding Instructions
This product must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current. This
product is equipped with a cord having a grounding wire with an appropriate grounding
plug. The plug must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING - Improper installation of the grounding plug can result in a
risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the green grounding wire
to either flat blade terminal. The wire with insulation having a green outer surface with or without
yellow stripes is the grounding wire and must be connected to the grounding pin.
Check with a qualified electrician or serviceman if the grounding instructions are not
completely understood, or if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided. If the plug will not fit the outlet, have the
proper outlet installed by a qualified electrician.
This product is for use on a nominal 120 volt ac circuit and has a grounding plug that looks
like the plug illustrated below. Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter shall be used with this product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
