Nortrac 296025, Инструкции по установке/настройке, эксплуатации, обслуживанию и хранению

Страница: 8 / 38

Receiving & Transporting
8
Hopper
hood
Cutter
housing
5/16"nyloc
nut
5/16" flat
washer
5/16" x
1" bolt
Assembly Instructions
1. Attach Shields
to Top Hopper 1. Using (4) 5/16" x 3/4" carriage
bolts and (4) 5/16" nyloc nuts,
assemble in order shown.
2. Torque to 11 ft./lbs.
3. Assemble
Hopper Sides 1. Attach hopper right side to
hopper bottom, using (5)
5/16" x 0.625" bolts and (5)
5/16" nyloc nuts making sure
the flange on the hopper
bottom is in the inside.
2. Repeat with hopper left side
to hopper bottom.
3. Install hopper top and shields
to left and right hopper sides
using (8) 5/16" x 0.625" bolts
and (8) 5/16" nyloc nuts.
Make sure hopper top flanges
are in the inside.
4. Torque to 11 ft./lbs.
5. Attach Hopper
to Chipper Note: Two people are required – one to hold the hopper and one to fasten.
1.
Assemble hopper to cutter housing using
(6) 5/16" x 1" bolts, (12) 5/16" flat
washers, and (6) 5/16" nyloc nuts.
Torque to 11 ft./lbs.
Clear vinyl shield
Plastic shield
Shield
backer plate
Hopper top
5/16"
nyloc
nut
5/16" x 3/4" carriage bolt
Right hopper side
Hopper left side
Hopper bottom
5/16" nyloc nut
5/16" x 0.625"
bolt
Hopper top & shields
Flanges
Hopper right side
Note: Carriage bolt
heads are inside the
hopper, nyloc nuts
are outside the
hopper.