Norton TR 250 H Clipper, Руководство по эксплуатации

Страница: 6 / 20

6
1 Basic Safety Instructions
The TR 250 is exclusively designed for the cutting of tiles and abrasive materials with NORTON
diamond disks mainly on construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall
be borne entirely by the user. Observing the operating instructions and compliance with inspection
and servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator’s instructions Ear protection must be worn
Hand protection must be worn Eye protection shall be worn
Rotation direction of the blade Pump on Pump off