Norton DR520, Руководство пользователя

Страница: 10 / 41

10
III. MAINTENANCE AND COMPONENT DESCRIPTION
A. Motor Specifications Cardi
Specifications
MOTOR RPM BIT CAPACITY IN
MFR MODEL VOLT AMP LOW
GEAR
HIGH
GEAR
LOW
GEAR
HIGH
GEAR
Cardi D3-250 120 20 420 860 8"-10" 4"-7"
*Refer to motor owners manual supplied with drill for required motor maintenance.
The Cardi motor is designed to operate at two
speeds. Changing speeds is accomplished by
using the speed shift knob built into the gear
case of the unit.
Changing the rpm of the motor is
accomplished as follows:
1. Turn off switch, wait for spindle to stop then
rotate the shift knob to go from the
HIGH(
••
) to LOW(
•
) speed.
2. Move the shift knob until the clutch teeth
are fully engaged. Moving the knob toward
the single dot engages the LOW rpm while
moving the knob toward the two dots
engages the HIGH rpm.
3. Attempting to shift with the motor off may
require turning the spindle by hand to
engage the clutch.
Changing the rpm while the motor is running
will damge gears and void warranty.
NortonParts.com
888-634-4289
An iBuy Stores Company