Norton Commando 961, Руководство по обслуживанию

Страница: 19 / 20

19
Description
Component Torque Remarks
N-m
Front forks
PINCH BOLT SUPPLIED WITH FORKS (for axle) BOLT, CAP HD, M8 X 25 20
LOWER YOKE CLAMP BOLTS BOLT, CAP HD, M8 X 20 X 1.25 20
SWITCH CUBE LH SCREW, M5 X 40 3
SWITCH CUBE LH SCREW, M5 X 30 3
SWITCH CUBE RH SCREW, M5 X 22 3
THROTTLE ACTUATOR,TWIN CABLE THROTTLE ACTUATOR,TWIN CABLE 4
THROTTLE ACTUATOR CLAMP BOLT, CAP HD, M6 X 20 x 1.0 8
TOP YOKE CLAMP BOLTS BOLT, CAP HD, M8 X 20 X 1.25 20
TOP YOKE LOCK NUT NUT, UPPER YOKE, M25 80
ADJUSTER NUT 40NM TO SEAT BEARINGS,
BACKED OFF, THEN RE-TORQUED TO 8 NM
LOCKNUT, M25
8
LOCKED UP TO ADJUSTER NUT 40 NM STEM INTERMEDIATE NUT, M25 40
REMOTE RESERVOIR BOLT (remote) BOLT, CAP HD, M6 X 12 X 1.0 8
RESERVOIR TO BRACKET (axial) LOCKNUT, FLANGED, M5 X 0.8 7
TO CLAMP SLAVE CYLINDER TO SPROCKET
COVER
BOLT, CAP HD, M6 X 16 X 1.0
12
HANDLEBAR CLAMP TO YOKE (not cafe racer)
NUT, M10 X 1.5
43
UPPER HANDLE BAR CLAMPS BOLTS (not
cafe racer)
BOLT, CAP HD, M8 X 22 X 1.25
20
Rear suspension
SWINGARM PIVOT NUT LOCKNUT, THIN, M16 X 1.0 60
THREADED ADJUSTER, SWINGARM THREADED ADJUSTER, SWINGARM 6
USED TO MOUNT CHAIN RUBING STRIP
BOLT BUTTON HD, INT HEX M5 X 20 X
0.8
9
RSU'S TO FRAME
BOLT, BUTTON HD, INT HEX,
FLANGED, M8 X 16 X 1.25
22
Frame
TO CLAMP ENGINE MOUNT BRACKET
LOCKNUT, M8 X 1.25 26
NUT, USED WITH ENGINE MOUNT BOLT LOCKNUT, M12 X 1.75 85
FRAME ADJUSTER, M23 FRAME ADJUSTER, M24 15
REAR ENGINE MOUNT BOLT BOLT, M12, ENGINE, REAR MOUNT 85
Foot controls
FOOT CONTROL FRAME TO FRAME ASSY BOLT CAP HD, M8 X 50 X 1.25 27
TO CLAMP PEG ASSY TO CONTROL
PLATE
LOCKNUT, M10 X 1.5 40
TO CLAMP TOE PEG TO PEDAL BOLT, CAP/HD, M6 X 40 10
TO CLAMP PLATE TO PEDAL BOLT, CSK HD, M4 X 0.7 X 12 7
USE THREE BOND 1327
PIVOT BOLT, SIDESTAND
20
GEAR CHANGE TO SELECTOR SHAFT
BOLT, CAP HD, M6 X 40
9