Norton Clipper CDR 252, Руководство по эксплуатации

Страница: 7 / 24

VERS.2015.04.21 CDR 252_MAN_EN
7
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before commencing work

Before commencing work, make yourself familiar with the working environment at the
place of use. The working environment includes: obstacles in the area of work and
manoeuvre, the firmness of the floor, necessary protection at the site relating to public
thoroughfares and the availability of help in the event of accidents.

Immediately remove damaged or badly worn core bits, as they endanger the operator
whilst rotating.

Only fit NORTON diamond core bits to the machine! The use of other tools can damage
the machine!

Read the core bits’ specifications carefully to choose the adequate tool to your
application.

Make sure the handle of the machine is free from oil or grease.

Attention is drawn to the use of BS2092 safety goggles in conformity with specified
Processes No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1.

Make sure that no mounting tool is left on the machine before starting it.
Electrical powered machine

Make sure that the electrical supply of the machine is equipped with a grounded
protective connector. If you have doubts, let a qualified electrician check the electrical
system.

Never pull the machine by the cable to transport it or to separate it from the electrical
supply.

Avoid any contact between the cable and extension cable and heat sources, oil, and
sharp edges.

Always check the cable before commencing work. If it is damaged, let a qualified
electrician replace it.

Switch the machine off, and isolate it from the main electrical supply before attempting
any maintenance or repair on the machine

In the event of the machine breaking down or stopping for no apparent reason, switch off
the main electricity supply. Only a qualified electrician is allowed to investigate the
trouble and remedy the fault.

Always isolate the machine from the electrical supply when not in use.
Machine Model
Machine Code
Weight Year of production
Machine type Serial number