Norton 70184603243, Руководство по эксплуатации

Страница: 10 / 36

VERS. 21.01.2019 CMV 1000 Verto_MAN_EN
10
Electrical powered machine

Always turn off the machine and separate it from the main source of electricity before any work
on the machine is done.

You can lock the ON-OFF (0
– I) switch using a padlock.

Make all electrical connections securely to eliminate contact of live wires with spray water or
dampness

It is IMPERATIVE that you earth the machine properly.

Shut down the machine immediately in case of danger.

In the event of the machine breaking down or stopping for no apparent reason, switch off the main
electricity supply. Only a qualified electrician is allowed to investigate the trouble and remedy the
fault.
2 MACHINE DESCRIPTION
Any modification, which could lead to a change in the original characteristics of the machine, may be
done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the
safety regulations.
2.1 Short description
The CMV 1000 Verto vertical saw is designed for durability and high performance for onsite wet and
dry cutting operations of a wide range of masonry, refractory and natural stone products.
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
2.2 Purpose of use
The machine is designed for cutting a large range of building and refractory materials. It is not
designed for cutting wood or metals.
2.3 Layout
Frame (1)
Jig-welded, reinforced and all-steel construction ensures perfect rigidity. The frame includes a large
capacity water tray (2) with drain plug. Frame has a built-in steel pallet (3) which meets a norm
European pallet and a fork lift bracket (4). Also, a crane hook is integrated into the frame and can be
lifted out if its needs (5).