17
8) Instructions for disassembling
The disassembling corresponds the assembling in reverse order.
Before folding the hull, lay it out flatly.
Fully drain the air from the sponsons. You
can also do this with the supplied pump,
since it has a suction function.
Then fold the sides in the middle
(lengthwise) as shown.
Then fold the bow once.
Then, lift the skin up where the bow piece
is on top and fold the skin again (as
shown in the picture)
Then place the skin flat on the floor. The
bow piece is then at the bottom.
Then fold the stern part once.
And then fold the skin once again on the
skin, which is folded from the bow
So you can get the hull back into the bag
easily.
bow
bow
bow is located (not visible) at the bottom
stern
stern
